Create an ad hoc WiFi hotspot internet connection in Windows 10

Every technician in the world probably knows everything there is to know about WiFi access points and Ethernet connections, but here's an article for those who need a little help figuring out how to create and access access points. Ad hoc WiFi access, plus how to do it. disable them when you are done with your work.

First, Ethernet refers to a system of a number, or rather a group of computer systems connected to form a LAN (Local Area Network) and sometimes MAN (Metropolitan Area Network), along with protocols that monitor the transfer and exchange of information . and try to avoid crosstalk in the transmission of two or more systems. Just as the Internet is a worldwide network, Ethernet is basically a LAN that allows for easy remote file transfer.

Recommended: 5 free wi-fi hotspot software

An Ethernet connection is really useful for creating and using an Ad Hoc WiFi access point. There are two basic types of WiFi connections: permanent and temporary. While most WiFi networks are permanent, i.e. they work in Infrastructure mode, some connections work better as Ad Hoc, i.e. temporary, because Ad Hoc networks don't need a central access point, and this can be very convenient when not. you are at home or when a centralized access point is not available.

How to create an ad hoc WiFi access point for Windows 10

A key requirement to run an Ad Hoc WiFi is that the user's device must run Windows 10. Also, of course, an Ethernet connection is required.

Additionally, some drivers may be required, without which the user will not be provided with Ad Hoc functionality. This can be checked via the Network Sharing Center and see if the ad hoc network is written along with “Set up broadband, remote access…” under the heading “Set up a new connection or network”. If adhoc is not present, you need to install the necessary drivers.

Creating ad hoc WiFi works on Windows PCs, tablets, laptops and phones. Here is a breakdown of the process of creating an ad hoc WiFi access point for Windows 10:

Walkthrough to create an ad-hoc Wi-Fi access point

First of all, the user needs to search for CMD in the search box on the taskbar, right click and run as administrator.

This is the command the user must type to create an ad-hoc Wi-Fi Internet connection:

netsh wlan set hosted network mode = allow ssid = adhocname key = password

Please note that it needs to be replaced adhocname with a name of your choice, this will be the name under which other devices will see the Wi-Fi connection available for connection. the Costa degli Etruschi is the password You need to replace a password of your choice that will be used to connect to the ad-hoc wi-fi connection.

Replace adhocname with a name of the user's choice and the password with whatever password the user wishes to set. (Of course, the quotes used here to delineate the scope of the command will not be part of the command itself.)

The next and last command will be: "netsh wlan starts the hosted network".

Now go to the Network and Sharing Center. Then the user has to right click on the Ethernet connection and choose Properties.

From here, the user can open the Sharing tab, under which two checkboxes will be displayed: "Allow other network users to connect via this computer's Internet connection" and "Allow other network users to control or disable the shared Internet connection. "

There will also be a drop-down list under a heading called Home Network Connection. After selecting the checkboxes (most important the first), the user can choose the newly created connection from the drop-down menu and click OK, enabling and running the Ad Hoc WiFi connection.

Now you can connect with your phone or any other device that supports wi-fi to the newly created ad-hoc connection.

How to stop ad-hoc Wi-Fi in Windows 10

Deactivating the connection is even easier. The user can open the command prompt (admin) once again and type this command:

netsh wlan stops the hosted network

The same methods for enabling and disabling ad hoc WiFi networks also apply to versions of Windows 8 and 8.1, so users with devices running Windows 8 and 8.1 can relax and follow the steps above. However, the drivers required for the procedure to work may differ in other versions.

However, a word of caution for users setting up an ad hoc WiFi access point: if the user shares their internet connection after creating the network, any other user who accesses that device using Quick User Switch will have access to the network. by default. Therefore, it would be advisable to disconnect from the Ad Hoc network after it has been used to the satisfaction of the user.

How to fix the error "Could not start the hosted network"

If you are trying to connect with the command netsh wlan starts the hosted network, sometimes an error message pops up in Windows as below screenshot shown.

• Could not start the hosted network
• The group or resource is not in the correct state to perform the requested operation.

To correct this error, simply press key Windows + r and then write devmgmt.msc on it and hit enter.

Once the device manager is open, click on View and select the Show hidden devices option.

Now, click on the network adapters from the list and then find Microsoft hosted virtual network adapter.

Right click on it and then click Enable.

Now relax, you've solved the problem. Just open CMD profit and enter the same code netsh wlan starts the hosted network. It will start without any problem.

How to check if your PC supports ad-hoc connection or not

First of all, open the command prompt and enter the line indicated below.

netsh wlan mostra i driver

Now, in the returned results, look for the line that says, hosted network supported. If you say yes, your computer supports an ad-hoc connection.