il Bootres.dll danneggiato The error is a critical system problem that prevents Windows from starting. The Bootres.dll file responsible for starting Windows may be corrupted and generate this error.
The corrupted Bootres.dll problem is usually displayed in a small dialog box with the following error message:
The resources custom bootres.dll critical startup file is corrupted
Learn more about Bootres.dll. It is a Dynamic Link Libraries (DLL) file associated with the Windows operating system. It plays an important role in the Windows startup process, so any errors related to it can prevent your PC from starting.
Know how to repair damaged bootres.dll with the following solutions:
Solution 1: Run the SFC scan on your PC
SFC Scan is a command prompt utility in Windows that scans your PC for damaged or problematic files. When a problem is detected, the tool automatically repairs it. Here, we tell you how to perform SFC scan in Windows automatic repair environment as your PC cannot boot.
Step 1: Enters Windows self-repair mode. To do this, start your PC and when the first screen with the manufacturer's logo appears, force the PC to shut down by long pressing the physical power button for about 5 seconds. Using the power button, restart your PC. Now, repeat the forced shutdown process 3-4 times. Your PC will go into automatic repair mode.
Step 2: In automatic repair mode, select the file Solve problems option.
3 pass: When the following screen is displayed, select the file Advanced options.
Phase 4: In the advanced options menu, click Symbol of the system.
5 pass: In the command prompt window, type the following command and press the key Log in key:
sfc / scannow
Wait until the scan is complete. When you are done, exit the command prompt and restart your PC and see if the problem is resolved.
Solution 2: Run a DISM scan
DISM is another command line repair utility that has been reported to fix corrupted bootres.dll issue. Again, you will need to run this utility in Windows self-repair mode. These are the steps:
Step 1: Use the procedures described in Step 1 to step 4 di Solution 1 Log in Automatic repair mode and I ran Symbol of the system.
Step 2: In the command prompt window, type the following command and press Enters:
Dism / Online / Cleanup Image / RestoreHealth
Now let the DISM scan run. The scan may take some time to complete; do not interrupt the process. Once the scan is complete, exit Command Prompt and Self Repair Mode. Restart your PC and see if the resources custom bootres.dll critical boot file corrupted error still displays.
Solution 3: Run ChkDsk Scan
Corrupted or bad sectors on the hard drive can also be the reason behind the corrupted bootres.dll problem. Running the ChkDsk utility will scan your hard drive for problems and fix them when it finds them. Here's how to run a ChkDsc scan:
Step 1: Opens the command prompt in Windows self-repair mode. To do this, follow the instructions given by Step 1 to step 4 in Solution 1.
Step 2: Copy and paste the following command into the Command Prompt window, then press the key Log in key:
chkdsk C: /f /x /r
Here, C indicates the name of the drive where Windows is normally installed. If Windows on your PC is installed on a drive with a different name, be sure to check and replace the letter C with that drive's name.
Solution 4: Run Startup Repair
Performing startup repair has helped many users to get rid of the corrupted bootrec.dll error. If you cannot start Windows, you can run the Startup Repair Tool via the automatic repair mode.
Step 1: Enters Windows self-repair mode. For this, follow Step 1 di Solution 1.
Step 2: In the first screen, select the file Solve problems option.
3 pass: In the Troubleshooting menu that opens, click Advanced options.
Phase 4: Now click on the file Initial repair option available in the advanced options menu.
The Startup Repair Tool will now run. Follow the onscreen instructions to complete the process. This may take some time.
After the startup repair is complete, restart your PC. The problem is solved?
Solution 5: Re-create the EFI directory structure
Here another solution that you can try to get rid of resources custom bootres.dll critical boot file is corrupt error. To recreate the EFI directory structure, you will need to access the command prompt in Windows self-repair mode.
Step 1: To go Solution 1 and goes on Steps 1 to 4.
Step 2: Now, enter the following set of commands in the Command Prompt window. Press Log in after each command:
diskpart
list disk
(check boot drive number here)
select disk x
(replace x with the boot drive number)
list volume
(note the volume number of the EFI partition)
select volume and
(here, y is the EFI partition number)
assign letter = z
(You can name the volume according to your choice, here I have selected z)
format fs = fat32 quick
bcdboot C: windows / s V: / f UEFI
(C is the partition on which Windows is installed; replacement is based on the partition name on the PC)
Now exit the command prompt and restart your computer. Is the corrupted bootres.dll problem fixed?
Solution 6: reset the system
The System Restore utility in Windows 10 allows you to restore your PC to the state it was in the past. You can also go through this process to restore your PC to a point where it was not facing the corrupted bootrec.dll issue. However, it comes with a prerequisite that you must have created a system restore point in the past. Even if you don't remember creating a restore point, try it. Follow the steps:
Step 1: Enter the Windows Automatic Repair Mode by following Step 1 di Solution 1.
Step 2: Now go to Troubleshooting> Advanced Options> System Restore.
3 pass: The System recovery the window will open now. Here, click on the file The next button.
Phase 4: On the next screen, you will see a list of restore points with the date and time signatures of when these points were created. Go ahead and select the latest restore point when your PC was running smoothly. After selecting, click The next.
You may need to follow the onscreen instructions now to reset your PC to the selected spot. Once the restore process is complete, the problem will be resolved and the file resources custom bootres.dll critical startup file is damaged the error will no longer bother you.
Solution 7: Enable / Disable Secure Boot in BIOS Setup
One of the ways to get rid of the corrupt bootres.dll problem is to change the safe boot value in the PC's BIOS settings. The BIOS settings are the PC motherboard settings. You can access the BIOS setup from the PC startup screen. After entering the BIOS setup, you will need to set the Secure Boot value to Enable or Disable. These are the steps to follow:
Step 1: Reboot your PC, then on the boot screen, press the key that tells you to enter the BIOS setup. Key selection is usually mentioned on the home screen in the following format:
Press Delete to install
The selection of the keys may vary depending on the PC between these keys: F1, F2, F10, Delete and Esc.
Step 2: Enter the Safety setup in the BIOS menu to find the file Safe Boot option. Now you can change the secure boot value to Qualified Yup Disabled or vice versa.
After making the changes, save and exit the BIOS setup, then restart your PC.
BIOS settings differ between motherboard manufacturers. If you cannot find the secure boot setting in the BIOS, please refer to the user manual.
If changing the safe boot value in the BIOS setup did not resolve the corrupted bootres.dll error, look for the final solution.
Solution 8: restart your PC
If none of the above solutions helped you get rid of the file resources custom bootres.dll critical startup file is corrupted error, restarting your PC would certainly help. By resetting your PC, you will remove all previous Windows settings and applications installed on your PC; however, you can keep your personal files.
Again, to reset your PC, you will need to enter the Windows automatic repair mode. Follow the steps below:
Step 1: Enter the Windows self-repair mode by following the instructions provided in Solution 1 - Step 1.
Step 2: In the first window of the automatic repair mode, select the file Solve problems option.
3 pass: On the next screen, select the file Restart this PC option.
Phase 4: On the Reset PC screen, you can choose between two options: Save my files e Remove everything. Select the Save my files option and continue with the restart process.
Wait for the restart process to complete. Your PC will be reset to factory settings and this will permanently remove the corrupted bootres.dll error on your PC.
So which of the above methods helped you to fix resources custom bootres.dll critical startup file is corrupted error on your Windows 10 PC? Provide your valuable feedback in the comments so other problematic users can get help. If you have not been able to fix the problem, please let us know too. We will do our best to avoid this error on your PC.
.
