You're seeing a popup that says "An error occurred in the program during initialization. Error code: 0x80070005? There are many presumable reasons that can generate this error code on your computer. Follow these simple solutions on your computer to fix the problem in no time.
Fix-1 Disable Windows Security-
1. Press Tasto Windows + I Open settings.
2. In the settings window, click "Update and security".
3. In the settings window, on the left side, click on “Windows security".
4. On the right side, click "Network and firewall protection".
Windows Security window will open.
5. In the Network Protection and Firewall window, click the network type next to which you will see “(active)"
(As if this computer were connected to a private net file. Then 'Private network' is displayed as 'active'.)
6. Now scroll down until you see Microsoft Defender Firewall.
7. Then change Microsoft Defender Firewall to 'off'.
8. Now click on "Homeicon (🏠) on the right side to return to the Windows Security window.
9. Now, in the Windows Security window, click on “Virus and threat protection".
10. On the right hand side, scroll down to the Virus & threat protection settings section, click “Manage your settings"
11. In Virus and threat protection settings, at "Real-time protection“, Change it in”off".
Restart your computer. After rebooting, try copying and pasting the file / folder again.
IMPORTANT:
Windows Defender Firewall Y Real-time protection constantly protect your computer from potential threats and dangers. Disabling them will make your device vulnerable to such threats. Therefore, we strongly recommend that you change both settings "InRight after trying the solution on your computer.
Fix-2 Restart VSC Service-
Volume Shadow Copy (VSC) organizes various processes to create a snapshot of important data.
1. Press Tasto Windows + R Open running Window.
2. In the running window, type "services.msc“And then press Log in.
3. In the Services window, scroll down until you see "Copia shadow del volume"Service.
4. Now, right click in the "Copia shadow del volume" click on "Home".
5. Now the right mouse button in the same service and then click "Restart“To restart the service.
Close the Services window.
Check if the error message is still displayed or not.
Fix-3 Manage Access Permissions-
This problem can also occur due to the lack of adequate access permissions.
NOTE: -
You will need to create a restore point on your computer before proceeding to the main solution. If you don't know how, follow our step by step guide on how to create a restore point. In case something goes wrong, you can easily restore the system to normal.
Step 1 Create the SubInACL folder on drive C:-
1. Press Windows Key + E to open the File Browser window.
2. In the File Browser window, double-click in the “Local drive C:".
3. Right-click in space and then click "New>"And then you choose"Picker".
4. Name the new folder "SubInACL".
Close Window File Browser.
Step 2 Download and install the SubInACL package
1. Visit this link.
2. Click on 'download“To download the installer SubInACL file.
3. Now choose a suitable download location on your computer and click on “Save".
Close the browser window.
4. Go to the location where you downloaded the installer.
5. Double click on it "subinacl.msi“To start the installation process.
6. Click on 'The next".
7. Then click on "Look".
8. Now go to the position of the "SubInACL“Folder you created earlier.
9. Then click on "ok".
10. Now click on "Install now".
11. When the installation is complete, click on "To finish“To complete the installation process.
Step 3 Create and run a script
Now you need to create and run a simple batch file on your computer.
1. Click the Search box next to the Windows icon, type “pad".
2. Now, click on “pad“In the high search result.
3. copy these lines here and paste those in the blank Pad page.
@echo off Set OSBIT=32 IF exist "%ProgramFiles(x86)%" set OSBIT=64 set RUNNINGDIR=%ProgramFiles% IF %OSBIT% == 64 set RUNNINGDIR=%ProgramFiles(x86)% C:subinaclsubinacl.exe /subkeyreg "HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionComponent Based Servicing" /grant="nt servicetrustedinstaller"=f @Echo Gotovo. @pause
4. Next, click on “archive"In the menu bar, then click"Save eat".
5. Now, set "File Name:" as "Script1.bat"And click" Save as type: "And set it as"All files".
6. Then click on "Save“To save the batch file.
Close the Pad window.
7. Go to the location where you just saved the batch file.
8. Now, the right mouse button in "Script1.bat", Then click"Run as administrator".
Wait for the process to complete.
Restart your computer.
Check if this helps.
Step 4 Create and run another script
You need to run another script on your computer.
1. Open Pad on your computer.
2. copy Y paste these lines in the blank Pad page.
@echo off C:subinaclsubinacl.exe /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f C:subinaclsubinacl.exe /subkeyreg HKEY_CURRENT_USER /grant=administrators=f C:subinaclsubinacl.exe /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f C:subinaclsubinacl.exe /subdirectories %SystemDrive% /grant=administrators=f C:subinaclsubinacl.exe /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f C:subinaclsubinacl.exe /subkeyreg HKEY_CURRENT_USER /grant=system=f C:subinaclsubinacl.exe /subkeyreg HKEY_CLASSES_ROOT /grant=system=f C:subinaclsubinacl.exe /subdirectories %SystemDrive% /grant=system=f @Echo Gotovo. @pause
3. Click on 'archive"And then click"Save eat".
4. Then set "File Name:" as "Script2.bat"Ea" Save as type: ", Set it as"All files".
5. Now click on "Save“To save the batch file.
Close the Pad window.
6. Go to the location where you just saved the batch file.
7. Now, the right mouse button in "Script2.bat", Then click"Run as administrator".
After the batch file has finished executing the commands, restart your computer.
After restarting your computer, you will no longer see the error message.
Fix-4 Change the read-only attribute of the system volume information
Changing the system volume information read-only status can fix this problem.
1. Press Windows key + E to open the File Browser window.
2. In the File Browser window, double-click in the “Local drive C:".
3. Now you need to click on "View“In the menu bar.
4. Now click on "options".
5. When the folder option pops up, click the "ViewEyelash ".
6. Then, take a look at the "Show hidden files, folders and drives".
7. Now scroll down and uncheck the "Hide protected operating system files (recommended)".
8. If there is a confirmation message, click "Yup".
9. Then click on "To apply"And then click"ok".
10. Now you will see the 'System Volume Information' folder in C: drive.
eleven. Right click on him "System volume information"Folder then click"Property".
11. In the Properties window, make sure to leave a 'Box' check mark in the "Read only"option.
12. Finally, click on "To apply"And then click"ok".
Close the File Browser window.
