The dependency pool or service was not started It is a very common error that Windows users have faced since Windows 7. And it still appears with Windows 10. So what is it? Failed to start dependency pool or service error in Windows 10? When a user cannot connect to the Internet in any way, this error appears in the file Networks and Shares. It affects all types of connections, both wireless and ethernet.
Users usually try to fix this problem by solving it Networks and Shares. But this may or may not lead to another type of error, which is "The diagnostic policy service is not running". Some even try restarting the PC to fix it, and even that can't help sometimes. In any case, there are a couple of solutions for Failed to start dependency pool or service error in Windows 10. These solutions should permanently fix the problem for sure. Let's find out what they are:
How to fix the error "Failed to start service or dependency group in Windows 10"
We will discuss three methods to fix the error. Try them in the order listed until the problem is solved.
# 1 - Add “Local Service” and “Network Service” to administrators group via command prompt
In this process to fix The dependency pool or service did not start error, we will use the command prompt in administrator mode to start a couple of services on your PC. To perform this process, follow the steps listed below:
Step 1: Press Win + X keys on the keyboard. From the displayed list of options, click Command Prompt (Admin) option. This will open the Command Prompt window in administrator mode.
Step 2: Enter the following command in the command prompt window and press Log in key:
net localgroup administrators localservice /add
3 pass: Then, enter the following command in the same command prompt window and press the button Log in key:
net localgroup administrators networkservice /add
After running the previous two commands, type Departure in the command prompt window.
Then restart your PC.
After reboot, verify that you can access the internet and do not download Failed to start pool or dependency service error again.
# 2 Edit register-
Editing the registry on your computer may fix the problem.
However, before proceeding to the main process, we strongly recommend that you create a registry backup on your computer. After opening the Registry Editor, click on "archive">"Export“To create the backup.
If something goes wrong, you can recover the log by simply importing the backup.
1. Click Search box and then type "regedit".
2. Now click on "Registry Editor“From the search results to open it on your computer.
3 inch Registry Editor window, on the left side, go to this location-
4. Now, on the right side, double click on "DependOnService“DWORD value to change it.
5. Next, configure "Value data: 'for"RPCSS".
6. Click on 'ok“To save the change on your computer.
Close the Registry Editor window.
7. Now press Tasto Windows + R to open the file run window.
8. In the running window, type "services.msc“And then press Log in.
Services window will open.
9. Now scroll down and double click on him "Application-level gateway service".
10. Now, click on the drop-down menu next to 'Start type:'.
11. Select "Automatic“From the drop-down list.
12. Finally, click on "To apply"And then in"ok“To save the changes.
Follow all the steps mentioned above to automate these services.
a. Network Connections b. Network Local Awareness c. Plug and Play d. Remote Access Conection Manager e. Remote Procedure Call (RPC) f. Telephony
For all these services, double click on them one by one and change the startup type to "Automatic".
Once you are done automating these services, start again your computer to save the changes.
# 3 - Perform a normal boot to fix the dependency or group service failure that failed to start
The PC can be configured to boot in selective boot mode or diagnostic boot mode. These are the ways to start a PC faster than normal. While booting in these modes, all drivers and services do not start with the PC. This could be the reason for all the problems you are facing with the network connection.
You need to make sure your PC is set to boot with normal boot mode and this problem will be fixed. These are the steps to do it:
Step 1: Open the run by pressing the button Win + R keys on the keyboard. In the Run box, type msconfig and press the button Log in key.
Step 2: A System configuration window that opens, stay in the file general language. There you will find a file Normal startup option. Select the radio button next to it. Then click To apply then ok buttons.
Once the settings are applied, restart your PC. You can now access the internet without downloading The service or dependency group could not start the error on Windows 10.
If the problem is not solved by this action, then try the next method, it will definitely help you.
# 4 - Enable all network services
To fix the “Failed to start service or dependency group” error in Windows 10, you can also try to enable automatic startup of all network services on your PC. This way, all network related services will be started automatically when the PC starts up. These services may not start with the PC and cause the problem. Doing so is very simple. Follow these steps:
Step 1: Open the run box. For this, press Win + R keys together on the keyboard. TO run box type services.msc and press Log in key.
Step 2: The Services the windows will open. Here you will find a list of services performed by Windows. You should look for the following services in the list and make sure their startup type is Automatic. If not, you need to change them to Automatic.
Look for the following services:
- Application-level gateway service
- Networked Location Awareness (NLA)
- Network connections
- Plug in and use
- Remote Access Connection Manager
- Remote Procedure Call (RPC)
- Automatic Remote Access Connection Manager
3 pass: When you find one of these services, right-click on it, then click Property in the context menu.
Phase 4: A new window will open. Here in the general tab, you will find a file Start type Drop-down menu. Click on it and select the file Automatic option. When done, click ok Back to Services window.
Repeat step 4 for all services mentioned in the list above. When you're done with all the services, it's time to restart your PC. After reboot, check if the internet is working and you don't get Dependency service or group failed to start Windows 10 error.
Dependency service or pool failed to start error is not that difficult to fix. You just have to follow the correct approach and you will be ready in minutes. If you are still unable to fix the problem, the last resort would be restart your PC without deleting your personal files. However, this would remove all personal software and settings but personal data such as videos, images, audios, documents, etc. So make sure what you are doing.
If any of the steps worked for you, don't forget to mention the same below in the comments.